FAQ

How are our products delivered?

On flatbeds, vans or containers carefully loaded and protected to any national or international destination.

How should our products be handled?

Pinelli Millwork must be stored in a dry, roofed, clean location at all times and must be transported in closed trucks, containers, curtain side trucks and/or properly tarped flatbeds. Until the final top coat has been applied and the product has been installed following all paint manufacturer recommendations as well as best building practices, the product must be protected from exposure to direct sunlight, ground contact and adverse weather conditions. The material must be stored in the installation space for at least 3 days before installing. Please follow the recommendations of the paint manufacturer when painting the products we manufacture.

How are our products delivered?

In carefully loaded and covered platforms in our Ciudad Juarez, Chihuahua, Mexico facilities.

How are our products delivered?

In carefully loaded and covered platforms in our Ciudad Juarez, Chihuahua, Mexico facilities.

Do you manufacture door frames?

Yes, Pinelli Universal manufactures split jambs, flat jambs, interior and exterior door jambs. End-work available (dado and precision end trimming).

Do you manufacture trim boards?

Yes, Pinelli Universal manufactures trim boards of the following sizes: 2”, 5/4”, 23/32”, 21/32” by 2” – 12” in width, from 6’ – 20’ in length. Available in different finishes, from raw, primed, gesso and prefinished.

How wide can you manufacture a moulding?

We produce mouldings up to 8 1/4″ wide.

What raw material do you use?

South American Radiata Pine from sustainable plantations, certified by PEFC and FSC, and North American Ponderosa Pine from sustainable plantations.

Do you produce solid mouldings?

Yes, Pinelli Universal manufactures in 7′ and 8′ in length.

Do you produce cut stock?

Yes, Pinelli Universal manufactures finger joint and solid in 5/4” and 6/4” thick by 1-5/8” – 11-1/4” in width, and by 10” – 7′ in length.

Can you apply labels to your products?

Yes, Pinelli Universal applies them ranging from standard barcodes ones to highly customized labels to fit any customer needs.

How do you package your products?

From standard unit sizes to maximize freight, to customized packaging to fit any customer needs. Shrink wrapping available.

Can you paint your products?

Yes, using different methods, ranging from primming, gesso coating and prefinishing.

Do you have buffing and sanding capabilities?

Yes, for all profiles.

Do you apply topcoat to your products?

Yes, Pinelli Universal uses spray paint and we can match any color you request.

PRODUCTS

At Pinelli, the products we offer include finger-jointed moldings, cut stock, trim boards, door and window components, panels, finger-jointed blanks, frames for photographs and paintings, special packaging, machining and finishings and more.

Coffee Bean

Finger-Joint Mouldings

Coffee Bean

Trim Boards

Coffee Bean

Door and Window Components

Coffee Bean

Panels

Coffee Bean

Finger-Jointed Blanks

Coffee Bean

Frames for Photographs and Paintings